إحصائية |
المتواجدون الآن: 1 زوار: 1 مستخدمين: 0 |
|
|
|
الرئيسية » 2013 » أوكتوبر » 12 » Delcam FeatureCAM 2014 R1 SP1
float:center
8:09 PM Delcam FeatureCAM 2014 R1 SP1 |
Delcam FeatureCAM 2014 R1 SP1 | 1.4 Gb
Delcam
launches the 2014 release of FeatureCAM feature-based CAM software. The
release includes a number of new options for turning, four-axis rotary
machining and turn-mill operations. Other enhancements in this release
include more strategies for two-axis finishing and easier programming of
probing sequences.
FeatureCAM was the world's first feature-based
programming software when it was launched in 1995. Constant development
since then has ensured that the system has retained its leadership in
programming speed and ease of use, while an increased range of
strategies has been added to provide more efficient toolpaths giving
greater productivity on a wider range of machines.
The first
improvement to turning in FeatureCAM 2014 gives the ability to add
fillets to any sharp corners, for example, for automatic deburring,
without having to edit the geometry. The user simply has to specify the
radius to be applied and all the sharp corners will be filleted
automatically. Similar functionality for automated chamfering of corners
has been available in FeatureCAM for several years.
Turning
simulation has been made more realistic with the ability to program and
simulate the movements of the steady-rest that can be used to position
large parts during turning and the tailstock that can be used to hold
long parts on centre during machining. Collision detection against both
these types of accessory is undertaken automatically during both cutting
and transfer operations.
Programming of both turn-mill and
four-axis equipment has been made much easier with the ability to change
the index axis part-way through programming. Previously, all aspects of
the part, including features, geometry and curves, would have to be
moved if a change in the index axis was required. Now, this can be
achieved simply by creating a new user coordinate system and using that
as the new index axis.
An improvement to the FeatureCAM interface
will make it easier to use a curve to define start points and plunge
points for both turning and milling. Users can now pick these curves by
clicking on them, instead of having to type the name of the curve.
The
ability to incorporate probing routines into machining programs was
added in FeatureCAM 2013 to make it easier to undertake unsupervised
production operations by allowing automated checks to be carried out
before, during and after machining. Programming of these operations has
been made easier and quicker with the new ability to incorporate
decision-making with built-in options in the software, instead of having
to hand-write toolpath edit commands. For example, it is now easier to
include a re-machining command if the probing results show that more
material needs to be removed from the part.
Finally, a number of
extra strategies and options have been added for two-axis finishing.
These include the ability to use larger stepovers with automatic
machining of any upstands that may be left, continuous spiral machining
either from outside to inside or inside to outside, support for stock
models created from roughing toolpaths, and automatic avoidance of
clamps.
Download http://ryushare.com/444d94d7863d/redelfu1432bR1S1.rar http://ryushare.com/4364c03276e5/redelfu1464bR1S1.rar
http://rapidgator.net/file/5803372e2a3b24cb362b7b681a919607/redelfu1432bR1S1.rar.html http://rapidgator.net/file/75bd4926bcbaebed9a9b956e4c603e19/redelfu1464bR1S1.rar.html
http://uploaded.net/file/2soqrpyh/redelfu1432bR1S1.rar http://uploaded.net/file/xuumrspo/redelfu1464bR1S1.rar
http://dizzcloud.com/dl/165mvyX/redelfu1432bR1S1.rar http://dizzcloud.com/dl/165mvXf/redelfu1464bR1S1.rar
|
الفئة: CAD / CAM |
مشاهده: 315 |
أضاف: roka
| الترتيب: 0.0/0 |
|
|
|